Furnace Repair & Replacement in Livermore, CA
EM Energy & Air provides furnace repair, maintenance, and replacement services throughout Livermore, CA. Our technicians work on gas furnaces and central forced-air heating systems, from routine service and troubleshooting to complete equipment replacement. We install high-quality American-branded furnaces, with Carrier as our preferred manufacturer, and can help you select a system that suits your home and budget.
Contact us for a free furnace inspection and estimate. We’ll evaluate your equipment, explain the available options, and provide straightforward pricing before any work begins.
Read Our Reviews
Furnace Repairs for Heating Problems Large and Small
A furnace that won’t start, blows cool air, or shuts off before the house reaches the desired temperature may have several possible problems. A faulty ignition component can prevent the burners from lighting, while a dirty flame sensor may cause the furnace to shut down shortly after ignition.
Blower motors, thermostats, and restricted airflow can also affect heating performance. Some problems develop gradually, such as a blower that becomes noisy or a furnace that takes longer than usual to warm the house.
Our technicians inspect the equipment and test the components associated with the symptoms. Once we’ve identified the problem, we’ll explain the recommended repair and its cost.
If you smell gas, leave the building and contact your gas utility or emergency services from a safe location. A carbon monoxide alarm also requires immediate attention. Evacuate the home and contact emergency services rather than attempt to troubleshoot the furnace yourself.
When Does It Make Sense to Replace an Older Furnace?
Many residential furnaces last approximately 15 to 20 years, although actual service life depends on maintenance, installation quality, and operating conditions. Age alone doesn’t determine whether a furnace needs replacement.
If your furnace is otherwise in good condition and needs a relatively inexpensive repair, keeping it may be the sensible choice. Repeated breakdowns, expensive component failures, or a deteriorating heat exchanger can change that calculation.
We also consider how well the existing furnace heats your home. An older system may still operate but struggle to maintain comfortable temperatures or consume considerably more fuel than a modern replacement.
EM Energy & Air can explain the expected repair costs alongside replacement options so you can decide which investment makes sense.
A Few of Our Recent Projects
New Furnace Installation for Homes in Livermore
High-Efficiency Gas Furnaces From Carrier and Other American Brands
We install residential gas furnaces from established American HVAC brands, with a preference for Carrier equipment.
New furnaces are available in different efficiency ratings and operating configurations. The Annual Fuel Utilization Efficiency (AFUE) rating describes how efficiently a furnace converts fuel into usable heat over a typical heating season. A 95% AFUE furnace, for example, delivers approximately 95% of the fuel’s energy as heat to the home under the rating’s test conditions.
Equipment options also include single-stage and multi-stage heating, along with variable-speed blower motors. These features can affect how consistently the furnace distributes heat and how much noise the system produces.
We’ll explain the differences and recommend equipment appropriate for your home’s requirements.
Proper Furnace Sizing and Compatibility With Existing Ductwork
A replacement furnace needs to match the home’s heating demand. Installing a larger unit than necessary can cause frequent starts and stops, while an undersized furnace may struggle during colder weather.
We assess the home’s heating requirements and examine the existing ductwork before recommending equipment. Airflow restrictions, poorly sized ducts, and inadequate return air can affect the performance of even a new furnace.
Our team can also handle ductwork improvements when the existing distribution system needs attention.
What Happens During a Furnace Replacement?
Our installation crew removes the old furnace and prepares the space for the replacement unit. Depending on the equipment, this may involve modifications to the gas connection, venting, electrical supply, or condensate drainage.
We connect the furnace to the existing duct system and verify that the installation meets the equipment manufacturer’s requirements and applicable codes.
Before completing the job, our technicians test the ignition sequence, safety controls, thermostat operation, and airflow. We’ll also show you how to operate the new system and explain its maintenance requirements.
Most standard furnace replacements take one day. More involved installations may require additional work, but our larger projects typically finish within three days. We can generally schedule installations within one week.
Furnace Maintenance and Seasonal Heating Service
Annual furnace maintenance provides an opportunity to identify worn components, airflow restrictions, and other problems before they interrupt your heat.
During a service visit, our technicians inspect the ignition system, burners, blower operation, and accessible electrical components. We also check the air filter, examine venting conditions, and evaluate the furnace’s general operation.
Gas furnaces require particular attention to combustion and exhaust safety. A qualified technician can inspect the heat exchanger and related components for signs of damage or unsafe operation.
For homeowners in Livermore, scheduling maintenance before the cooler months is a practical way to prepare the system for regular use.
Free Furnace Inspections, Upfront Pricing and Installation Warranties
EM Energy & Air offers free furnace inspections and estimates in Livermore. We’ll examine your existing equipment, discuss the available repair or replacement options, and provide an estimate during the visit.
Our prices include labor, materials, and taxes, with no surprise surcharges after the project begins. We also offer free financing options for qualifying homeowners.
New installations come with our unlimited installation labor warranty. We can also address related ductwork and insulation problems, so you won’t need to coordinate several contractors if your heating system requires additional improvements.
Whether your furnace has stopped working or you’re considering a more efficient replacement, contact EM Energy & Air to schedule a free inspection.
Frequently Asked Questions About Furnace Service in Livermore
Why Does My Furnace Turn On and Off Every Few Minutes?
Frequent starting and stopping, known as short cycling, can result from restricted airflow, thermostat problems, overheating, or an oversized furnace. A dirty filter is one possible cause, but the problem may require further diagnosis. Our technicians can inspect the system to identify why it isn’t completing normal heating cycles.
Is It Worth Repairing a Furnace That’s More Than 15 Years Old?
Often, yes. A furnace that’s 15 years old may still have useful service life remaining, especially if it has received regular maintenance. The decision depends on the equipment’s condition, the cost of the repair, and whether major components are beginning to fail. We’ll explain both options when replacement is worth considering.
Can I Replace My Furnace Without Replacing My Air Conditioner?
Yes. Many homeowners replace their furnace while keeping an existing central air conditioner. However, the new furnace’s blower and controls must be compatible with the AC system. We’ll also check the existing evaporator coil and duct connections to determine whether modifications are necessary.
What Does AFUE Mean When Comparing New Furnaces?
AFUE stands for Annual Fuel Utilization Efficiency. It measures the percentage of fuel energy a furnace converts into usable heat over a typical heating season. Higher AFUE ratings indicate better fuel efficiency, although actual utility savings depend on the old equipment, household heating needs, and fuel costs.
How Long Does a Typical Furnace Replacement Take?
Most standard furnace replacements can be completed in a single day. Additional time may be necessary if the installation requires new venting, gas line modifications, or substantial ductwork repairs. EM Energy & Air will explain the expected schedule during your free estimate.
Do You Inspect the Ductwork Before Installing a New Furnace?
Yes. We evaluate the existing ductwork and airflow requirements when planning a furnace replacement. Undersized ducts, damaged connections, or inadequate return air can limit heating performance. If we find problems, we can recommend and perform the necessary ductwork improvements as part of the project.
We stand behind our work!
Copyright © 2026 EM ENERGY & AIR. CSLB #1153724
Design By Xammin